Detector Base

This base includes a built-in line fault isolator for use on Class A circuits. A detector must be installed for it to operate. The isolator base do...

The KI-RB is a Signature Series detector base. It connects the detector to the signaling line circuit (SLC), but does not support the GSA-LED. The ...

Kidde Commercial KI-SB4 /1.5 *Detector Base - Standard, For 4 Inch Sq. Box, Includes -Ts4 Skirt Detector mounting bases have wiring terminals that ...

FIRE-LITE B210W Detector Base Used For Wireless Detectors Specifications Weight 1 lbs Manufacturer Honeywell ...

DB-3S - Low Profile Mounting Base Specifications: Weight 0.2 lbs Manufacturer Siemens Industry, Inc. Brand Siemens Condition New U...

PAD300-4DB POTTER 4? Detector Base The PAD300-6DB and PAD300-4DB are low-profile, surface-mount bases used with Potter’s addressable detectors. Th...

PAD100-6DB POTTER 6? Addressable Detector Base The Potter PAD100-6DB and PAD100-4DB detector bases are used to install Potter’s addressable smoke ...

The Edwards EST B210LPF Plug-In Detector Base is a high-quality, reliable option for fire detection systems. With easy plug-in installation and a s...

Edwards EC2-SB4 4 Terminals 6? Diameter Standard Base with Trim Skirt The Edwards conventional photoelectric smoke and heat detectors are interchan...

Edwards EC2-RB 4 Terminals Auxiliary Relay 4? Diameter Relay Base The Edwards conventional photoelectric smoke and heat detectors are interchangeab...

The Model B112LP detector base is designed for use with System Sensor model 2151 photoelectronic and 1151 ionization detector heads. This four-wire...

The SMB600 Surface Mounting Kit allows System Sensor detectors to be surface mounted when the junction box intended to be used is not of adequate s...

Bezel Kits enable installers to easily turn any L-Series Fire or Plain device into a device that meets ECN/MNS requirements. Bezel kits are availab...

The B200SR-LF-WH and B200SR-LF-IV sounder bases are used with addressable detector heads. Refer to the appropriate manual for more information on s...

The B114LPBT detector base is designed for use with System Sensor model 2151 photoelectronic and 1151 ionization detector heads. The capability of ...

Edwards Signaling IB4U Isolator Detector BaseThe IB4U Isolator Detector Base is designed to prevent an entire Class A communications loop from bein...

AB-6 POTTER 6? Addressable Detector Base The Potter PAD100-6DB and PAD100-4DB detector bases are used to install Potter’s addressable smoke and he...

PAD300-6DB POTTER 6” Detector Base The PAD300-6DB and PAD300-4DB are low-profile, surface-mount bases used with Potter’s addressable detectors. Th...

SSD Sensor Base “E”. This “E” version is designed for extended exposure to high humidity (wet environments). Specifications: Weight 0.2 lbs Br...

Dual Address Base for Multi-sensor 4098-9754 with Connections for Remote LED Alarm Indicator or Unsupervised Relay Specifications: Weight 0.2 lb...

The Model B110LP detector base is designed for use with System Sensor models 2151 photoelectronic and 1151 ionization detector heads. This two-wire...

B110RLP is a 2-wire base with a 470 Ohm current limiting resistor for use with 100 Series smoke detectors. The B110RLP plug-in detector base is use...

The Mounting Base is required to meet local code and application requirements and for that System Sensor offers standard 4in and 6in bases, as well...

B401 plug-in detector bases are used with System Sensor® conventional S300 smoke and heat detectors. These bases make detectors more versatile than...