Potter

The PAD100-PSSA (Single Action) is activated by simply pulling the white “T” bar handle down. The PAD100-PSDA (Dual Action) is activated by ...

The PAD100-PSSA (Single Action) is activated by simply pulling the white “T” bar handle down. The PAD100-PSDA (Dual Action) is activated by ...

The PAD100-RM uses one (1) SLC loop address to provide one (1) Form C relay contact. The module mounts on either a 4” square or double gang box. Th...

The Addressable Sounder Base 6” (PAD100-SB) is a sounder base that may be utilized in a variety of applications. The base has a locking feat...

The Signaling Line Circuit expander PAD100-SLCE allows up to thirty one additional loops. Each loop adds 127 addressable sensors or modules ...

The PAD100-TRTI uses one (1) SLC loop address when monitoring two (2) Class B circuits or one (1) Class A circuit. The PAD100-TRTI also prov...

The PAD200-DUCT is designed and built to meet all local requirements, as well as the NFPA regulations regarding duct smoke detectors. Air sa...

Additional information Weight 2 lbs Dimensions 13.50 × 4.50 × 2.25 in Manufacturer Potter Electric Signal Company, LLC Brand Potter ...

Additional information Weight 0.4 lbs Manufacturer Potter Electric Signal Company, LLC Brand Potter Condition New Unit of Measurem...

The Photoelectric Smoke Sensor and the Carbon Monoxide (CO) sensor are both listed Analog Addressable sensors compatible with fire alarm con...

The PAD200-PD Photoelectric Smoke Sensor is a listed Analog Addressable smoke sensor compatible with fire alarm control panels that utilize the...

Additional information Weight 0.4 lbs Dimensions 3.93 × 3.93 × 1.94 in Manufacturer Potter Electric Signal Company, LLC Brand Potter ...

The PAD300-CD is an analog addressable carbon monoxide (CO) detector compatible with any fire alarm control panel that has the Potter Addres...

The PAD300-DD is an analog addressable photoelectric duct smoke detector (in duct) or mounted in the PAD300-DUCT or PAD300- DUCTR with sampl...

The PAD300-DUCT is designed and built to meet all local requirements, as well as the NFPA regulations regarding duct smoke detectors. Air sa...

The PAD300-DUCTR is designed and built to meet all local requirements, as well as the NFPA regulations regarding duct smoke detectors. Air s...

The PAD300-HD is a listed analog addressable rate of rise and/or fixed temperature heat detector compatible with any fire alarm control panel t...

The Isolator Base 6” (PAD300-IB) comes with an integrated isolator module included. The base has a locking feature for the detector that may...

The Addressable Low Frequency Sounder Base (PAD300-LFSB) is a sounder base that may be utilized in a variety of applications. The base has a...

The Photoelectric Smoke detector and the Carbon Monoxide (CO)detector are both listed Analog Addressable detectors compatible with fire alar...

The PAD300-PD has a sensitivity range of 1.1 to 3.5 % per foot and is UL listed. The PAD300-PD features drift compensation and has built in ...

The PAD300-PHD is a listed Analog Addressable smoke detector and a rate of rise and/or fixed temperature heat detector compatible with fire ...

The Addressable Relay Base 6” (PAD300-RB) is combination detector base with a relay module included. The base has a locking feature for the ...

The Addressable Sounder Base 6” (PAD300-SB) is a sounder base that may be utilized in a variety of applications. The base has a locking feature...