Simplex 4098-9714 TrueAlarm Photoelectric Smoke Sensor
Contact us for price breaks on large quantities!
Simplex 4098-9714 TrueAlarm Photoelectric Smoke Sensor
TrueAlarm photoelectric sensors use a stable, pulsed LED light source and a silicon photodiode receiver to deliver consistent and accurate low power smoke sensing. Three user selectable sensitivities for special applications are available for each individual sensor, 0.2%, 0.5%, and 1% per foot. Standard sensitivity is 1.25% to 3.1% per foot. The fire alarm control panel runs an algorithm that can vary the sensitivity for normal applications between 1.25% and 3.1% per foot.
Note: Fixed sensitivity settings higher than 1.0% per foot are not UL268 7th Edition compliant.
The sensor head design provides 360° smoke entry for optimum response to smoke from any direction. Due to its photoelectric operation, air velocity is not normally a factor, except for impact on area smoke flow.
Specifications:
| Weight | 0.20 lbs |
| Dimensions | 4.875 × 4.875 × 2.125 in |
| Manufacturer | Johnson Controls |
| Brand | Simplex |
| Condition | New |
| Unit of Measurement | EA (Each) |
| Production Status | Active |
| Type | Detector |
| Style | Plug-In |
| Detectable Medium | Smoke |
| Detection Method | Photoelectric |
| Programming | Set via Base |
| Protocol | IDNet, MAPNET II |
| Voltage | 24 VDC |
Features:
- Sealed against rear air flow entry
- Interchangeable mounting
- EMI/RFI shielded electronics
- Photoelectric technology sensing
- 360° smoke entry for optimum response
- Built-in insect screens